发布时间：2020-08-24 17:08:52 来源：http://www.jnpenhui.com
Just hanging on the ad tower spray painting screen advertising cloth, if the hanging is not smooth, it is necessary to analyze the situation. The common situation is that one side of the spray painting picture advertising cloth is flattened, and the symmetrical side is not flat.
This is caused by the flat side. In order to facilitate the explanation, the upper edge of the advertising tower is said to be a horizontal straight line (usually, the billboard is made of metal materials such as angle iron and steel pipe, and it is impossible for the iron frame to be absolutely straight line in the actual production process), and the advertising cloth is usually hung from the side above the single column billboard. The order of hanging cloth is from one end to the other.
Or on the side above the tower, from the middle to both ends. In the process of hanging spray-painted advertising cloth, if the middle of the upper advertising cloth is not on the straight line, it will result in the uneven bottom of the symmetry; if the middle of the upper advertising cloth is not on the straight line, it will form a symmetrical lower edge, which is easy to flatten, but the upper edge can not be flattened. At this time, put down a little of the advertising cloth at the upper end; Or pull up a little in the middle of the cloth.
The common method is to put it down at both ends to flatten the advertising cloth. When it comes to the principle of flattening the spray-painted advertising cloth, as long as you see this principle, any non-professional advertising production personnel can easily master it. After leveling the spray-painted advertising cloth, install it.
For more questions or details about Jinan inkjet production, please visit our website: http://www.jnpenhui.com There will be a lot of content in the website for reference only.